1. Home
  2. Products
  3. STANDARDIZED SPRINGS / STRAIGHT TYPE SPRINGS / TAPER TYPE SPRINGS / HELPER SPRINGS

Products

  • To install the standardized springs, please use the height adjustable parts (sold separately), or with TEIN's height adjustable shock absorber kit. Please refer to each pages for details.
  • All of TEIN's standardized springs are ground on both ends.
  • We use SWOSC-KV silicon chrome metal (JIS standard) to pursue the maximum quality of high tension and endurance for all standardized springs.
  • Stable quality, endurance, and high performance is maintained by special procedure (cooling formation).
  • The straight type springs are measured by inner diameter. and, specified spring seat is required. The outer diameter changes with alignment.
  • These springs are tapered and the bottom diameter is I.D.70mm, with two types of top diameters of I.D.90mm, I.D.100mm. These are standardized springs which have been developed to adopt with original upper mounts for original double wishbone and multi - link suspension system. Tapered Type Springs have the following outstanding characteristics.
  • Ideal for N1 and other vehicles whose upper mounts cannot be replaced under regulations.
  • By eliminating the upper spring seat, we have achieved low cost and adequate bump stroke.
  • It eliminates the damage to upper mount and other noise by maintaining same force input positions as original products.
  • As it is tapered, spring stroke can be maintained better than the straight type with same spring coefficient and length.
  • By setting 2 springs in a series, variable spring rate can be achieved.
  • It gives unlimited setting range with wide winding point weight set ups.
  • The A spring is a series twin spring, and the B spring can be selected from straight type with I.D.70mm or tapered type springs. A variable spring is achieved through changing over from original spring rate to B spring rate.
  • The spacer spring seat is necessary for installation with the A spring.

Springs most suitable for rally and off-road uses are available.
Please refer to TYPE Gr.N ( F.R.S. Spec / Standard Spec ) pages for more information.

We can produce made-to-order springs to the desired shape, size and/or rate. Click here for details.

Lineup & Price list STRAIGHT TYPE SPRING

  • List Price GBP £70.00 (excl VAT), GBP £84.00 (incl VAT) / pair (consisting of 2 Springs of the same Part No.)
Inside
Diameter
I.D.60 I.D.65mm
Free Length 200 175 200 225 250 300
Spring Rate
Part#
Stroke
Part#
Stroke
2.0     SL020-01200
142
     
2.5     SL025-01200
136
     
3.0 SN030-01200
135
  SL030-01200
140
SV030-01225
151
SM030-01250
166
SK030-01300
198
4.0 SN040-01200
131
SQ040-01175
116
SL040-01200
134
SV040-01225
144
SM040-01250
163
SK040-01300
187
5.0 SN050-01200
121
SQ050-01175
114
SL050-01200
125
SV050-01225
138
SM050-01250
153
SK050-01300
177
6.0 SN060-01200
118
SQ060-01175
107
SL060-01200
125
SV060-01225
128
SM060-01250
145
SK060-01300
176
7.0 SN070-01200
113
SQ070-01175
103
SL070-01200
121
SV070-01225
132
SM070-01250
148
SK070-01300
165
8.0 SN080-01200
116
SQ080-01175
97
SL080-01200
111
SV080-01225
127
SM080-01250
143
SK080-01300
156
9.0   SQ090-01175
99
SL090-01200
105
SV090-01225
122
SM090-01250
141
 
10.0   SQ100-01175
96
SL100-01200
113
SV100-01225
118
SM100-01250
131
 
12.0   SQ120-01175
93
SL120-01200
105
  SM120-01250
131
 
14.0   SQ140-01175
91
SL140-01200
104
  SM140-01250
109
 
16.0 SN160-01200
99
  SL160-01200
101
  SM160-01250
107
 
18.0     SL180-01200
98
     
Internal
Diameter
I.D.70mm
Free Length 150 175 200 225 250 275 300
Spring Rate Part#
Stroke
2.5         SC025-01250
176
   
3.0     SB030-01200
136
SY030-01225
153
SC030-01250
168
   
4.0 SA040-01150
103
SW040-01175
118
SB040-01200
135
SY040-01225
144
SC040-01250
162
  SD040-01300
193
5.0 SA050-01150
97
SW050-01175
112
SB050-01200
125
SY050-01225
138
SC050-01250
152
BA050-01275
172
SD050-01300
184
6.0 SA060-01150
95
SW060-01175
110
SB060-01200
128
SY060-01225
135
SC060-01250
146
  SD060-01300
176
7.0 SA070-01150
96
SW070-01175
107
SB070-01200
125
SY070-01225
131
SC070-01250
147
   
8.0 SA080-01150
91
SW080-01175
103
SB080-01200
116
SY080-01225
127
SC080-01250
146
   
9.0 SA090-01150
88
SW090-01175
98
SB090-01200
114
SY090-01225
125
SC090-01250
138
   
10.0 SA100-01150
85
SW100-01175
96
SB100-01200
108
SY100-01225
120
SC100-01250
128
   
12.0 SA120-01150
82
SW120-01175
93
SB120-01200
111
  SC120-01250
128
   
14.0 SA140-01150
82
  SB140-01200
105
       
16.0 SA160-01150
78
  SB160-01200
103
       
18.0 SA180-01150
78
  SB180-01200
100
       
20.0 SA200-01150
77
  SB200-01200
96
       

TAPER TYPE SPRING

  • List Price GBP £70.00 (excl VAT), GBP £84.00 (incl VAT) / pair (consisting of 2 Springs of the same Part No.)
Internal
Diameter
I.D.70mm-90mm I.D.70mm-100mm
Free Length 175 200 250 200 250
Spring Rate Part#
Stroke
Part#
Stroke
3.0     SG030-01250
169
   
4.0 ST040-01175
121**
  SG040-01250
168**
  SI040-01250
166**
5.0 ST050-01175
117
SH050-01200
131
SG050-01250
160
  SI050-01250
159**
6.0   SH060-01200
122**
SG060-01250
154
SJ060-01200
128
 
7.0 ST070-01175
106**
  SG070-01250
152**
SJ070-01200
122
 
8.0 ST080-01175
103
SH080-01200
119
SG080-01250
149
SJ080-01200
123
SI080-01250
149
10.0 ST100-01175
100
SH100-01200
115
  SJ100-01200
115
SI100-01250
141
12.0   SH120-01200
104
SG120-01250
128
SJ120-01200
105
 
14.0         SI140-01250
130
16.0   SH160-01200
102**
SG160-01250
113**
  SI160-01250
130**
18.0   SH180-01200
100
     
20.0   SH200-01200
97**
SG200-01250
109
   

**Discontinued and only available while supplies last.

HELPER SPRINGS

  • List Price GBP £36.00 (excl VAT), GBP £43.20 (incl VAT) / pair (consisting of 2 Springs of the same Part No.)
Parts # Inside Diameter Free Length Stroke Solid Length Adhesion Load Spring Rate
CR019-01080 I.D.65mm 80mm 57mm 23mm 116Kgf 1.9Kgf/mm
CR005-01080 I.D.65mm 80mm 62mm 18mm 31Kgf 0.5Kgf/mm
SS016-01080 I.D.70mm 80mm 58mm 22mm 98Kgf 1.6Kgf/mm
CS004-01095 I.D.70mm 95mm 76mm 19mm 27Kgf 0.3Kgf/mm
  • List Price GBP £56.00 (excl VAT), GBP £67.20 (incl VAT) / pair (consisting of 2 Springs of the same Part No.)
Parts # Inside Diameter Free Length Stroke Solid Length Adhesion Load Spring Rate
RH024-A1050 I.D.58mm 50mm 29mm 21mm 85Kgf 2.8Kgf/mm
RH023-A1070 I.D.58mm 70mm 47mm 23mm 111Kgf 2.3Kgf/mm
RH022-B1030 I.D.65mm 30mm 12mm 18mm 34Kgf 2.7Kgf/mm
RH022-B1045 I.D.65mm 45mm 27mm 18mm 74Kgf 2.7Kgf/mm